A-8AMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Measurement data wireless communication systemU-WAVENotes on identication of measurement data and multiple systems operation Following the above format, the U-WAVE data format starts with a 4-digit code where the first two digits represent receiver channels and the last two are transmitter channels. The large number of transmitter/receiver combinations possible with this scheme ensures that the receivers in a factory measurement system only accept data from the intended transmitters, even when several receivers are all within communication range of different transmitters using the same channel.Different frequency bands (up to 15 available) may also be used to further ensure that there are no communication problems between adjacent U-WAVE-R units.• Data formatExample of format when the Digimatic gage displays 12.34 DT1 01 02 +00000012.34 MHeader Unit M: mm DT1: Measurement data Digimatic gage display value* ST1: Status code**U-WAVE-T ID: 00 to 99U-WAVE-R ID: 00 to 99* Data interface function is switchable to “Measurement value only” e.g.) +00000012.34 ** Example of status code format ST1 01 02 0999999073 99 Header Device ID***Status code Status codeU-WAVE-T ID 99: Data cancellation U-WAVE-R ID01: No response from Digimatic gage 03: Measurement data missing, others*** Unique number assigned to U-WAVE at shipment ModelU-WAVE-T(IP67 type)U-WAVE-T(buzzer type)Order No.02AZD730D02AZD880DProtection RatingIP67NoneData reception indicationLEDsBuzzer and LEDsPower supplyLithium battery CR2032×1Battery lifeApprox. 400,000 transmissionsDimensions44×29.6×18.5 mmMass23 gLED ON(OK: Green, NG: Red)IP67 typeHighly resistant to dust and water ingressBuzzer typeReceipt of data can be checked by buzzer and LED (common specication)Buzzer indicates receipt of data TypeStandard connecting cableConnecting cable for foot switchPart Nos.Part Nos.(A) Water-proof model with output button02AZD790A02AZE140A(B) Water-proof model with output button02AZD790B02AZE140B(C) With data-out button02AZD790C02AZE140C(D) 10-pin plain type02AZD790D02AZE140D(E) 6-pin round type02AZD790E02AZE140E(F) Plain type straight02AZD790F02AZE140F(G) Plain type straight water-proof model02AZD790G02AZE140GFoot switch (option)No.937179TStandard accessoryClip for cable xingApplication example of the clipConnector attached to U-WAVE-T by 2 screwsDATAApprox. 80mmApprox. 500mmApprox. 80mmFigure 2. Connecting cable for foot switchDATA160mmU-WAVE-T側測定器側Figure 1. Standard type connecting cable(A) (D)(E)(B)(F)(C)(G)7 types of connectorU-WAVE-T2U-WAVE-T dedicated connection cable3Transmits measurement data to U-WAVE-R. Select IP67 or buzzer model, according to your application. U-WAVE-R can be connected to Digimatic gages by dedicated cable for U-WAVE-T (option).A dedicated cable connects a Digimatic gage to U-WAVE-T. Check the connector (A to G; refer to pages A-21 and A-22 for details) compatible with the Digimatic gage to be used and select either standard type (gure 1) or foot switch type (gure 2) according to your application.


page 35