MEASURING INSTRUMENTS CATALOG No.E2016
348/682

F-7FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.ABSOLUTE Digimatic Indicator ID-N/BSERIES 543 — with Dust/ Water Protection Conforming to IP66• Our unique ABS sensor restores the last origin position automatically when the indicator is turned on. • The chance of overspeed errors has been eliminated thanks to the ABS sensor.• Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting uid or coolant. • Slim body design (body width: only 35mm) is advantageous in multipoint measurement situations where space is restricted. The LCD readout can also be rotated 180° to allow reading from the most convenient direction. • Succeeded in digitalization of the Back Plunger type widely used for dial indicators for ID-B. A 5mm-stroke plunger with a higher degree of accuracy has been implemented by adopting a direct reading scale for plunger displacement.• Built-in tolerance judgment function provides OK, +NG, or –NG judgment of measurement with respect to the preset upper and lower limit values, indicating the status of a measurement with the appropriate symbol. The symbols can be displayed much larger. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. • There is a choice of convenient Interface Input Tools which enable the conversion of measurement data to keyboard signals and directly input them to cells in off-the-shelf spreadsheet software such as Excel. LCD readout reversal function*Quantizing error of ±1 count is excludedRated to IP66 water- and dust-proong standard and oil resistance improved. Body width 35mm• Lug No.21EZA145 (ISO/JIS type) No.21EZA146 (ASME/ANSI/AGD type)• Arm for ID-B (mode-to-order)• Rubber boot For oil resistance (NBR) No.02ACA376 (for ID-N) No.125317 (for ID-B) For durability (silicon) No.238774 (for ID-N) No.21EAA212 (for ID-B)• SPC cable: No.21EAA194 (1m) No.21EAA190 (2m)• USB Input Tool Direct (2m): No.06ADV380G• Connecting Cables for U-WAVE-T (160mm) : No.02AZD790G For footswitch: No.02AZE140G Refer to page F-60 for details.• Bifurcated connecting cable with zero-setting terminal: No.21EAA210 (1m) No.21EAA211 (2m)Two of the wires inside the cable are separated for zerosetting without touching the SET switch on the main body.Use these cables in combination with commercially availableswitches. Zero setting is performed by briey connectingthese two wires together (less than a second), and ABSpreset & recall by connecting for a second or more.• Contact points for Mitutoyo’s dial indicators (Refer to pages F-51 to F-54 for details.)Using the lifting knobLifting knobDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No.RangeResolutionAccuracy*Remarks543-57012.7mm0.01mm0.02mmSlim type ID-N543-5805.0mmBack plunger type ID-B543-57512.7mm0.01mm / 0.001mm0.01mm / 0.003mmSlim type ID-N543-5855.0mmBack plunger type ID-BInch/MetricOrder No.RangeResolutionAccuracy*Remarks543-571.5”.0005”, 0.01mm.001”Slim type ID-N543-581.2”Back plunger type ID-B543-576.5”0.01mm / 0.001mm .0005” / .00005”.00012”Slim type ID-N543-586.2”Back plunger type ID-BISO/JIS typeASME/ANSI/AGD typeTechnical DataDisplay: 6-digit LCD and signScale type: ABSOLUTE electrostatic linear encoderMax. response speed: Unlimited (Measurement by scanning cannot be performed)Measuring force:2.5N or less (ID-N)2.0N or less (ID-B)Stem dia: 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type)Standard contact point:901312 (ISO/JIS type)21BZB005 (ANSI/AGD type)Battery SR44 (1pc.) : 938882 for initial operational checks (standard accessory)Battery life: Approx. 7,000 hours of continuous useFunctionsZero-setting, Presetting, Direction switching, Tolerancejudgment, Display hold, Data output, inch/mm conversion (inch/mm models), LCD readout reversalAlarm:Low voltage, Counting value composition error,Overow error, Tolerance limit setting errorOptional accessories• Lifting knob (only for ID-N) No.21EZA105 (ISO/JIS type)* No.21EZA150 (ASME/ANSI/AGD type)* Spindle can be manually lifted. Remove the spindle cap for ID-N and attach the lifting knob to the spindle. Note that water resistance is not maintained in this conguration.543-575543-585(Refer to page X for details.)

元のページ 

page 348

※このページを正しく表示するにはFlashPlayer10.2以上が必要です