F-5FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.Digimatic Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.Technical DataAccuracy: Refer to the list of specifications (excluding quantizing error)Resolution: 0.01mm type 0.01mm 0.001mm type 0.01mm/0.001mm .0005"/0.01mm type .0005"/0.01mm .00005”/0.001mm type .0005”/.0001”/.00005”/ 0.01mm/0.001mmDisplay: 6-digit LCD and sign Scale type: ABSOLUTE electrostatic linear encoderMax. response speed: Unlimited (Measurement by scanning cannot be performed)Measuring force: Refer to the list of specificationsStem dia.: 8mm (ISO/JIS type) or 3/8” (ANSI/AGD type)Battery: SR44 (1 pc.), 938882 for initial operational checks (standard accessory)Battery life: Approx. 7,000 hours of continuous useDust/Water protection level: IP42FunctionsPreset, Zeroset, GO/±NG judgment, Countingdirection switching, Power ON/OFF, Simplied calculation,Function lock, Data hold, Data output, inch/mm conversion (inch/mm models)Alarm:Low voltage, Counting value composition error,Overow error, Tolerance limit setting errorOptional Accessories• Lifting Lifting lever: No.21EZA198 (12.7mm/.5” ISO/JIS type) No.21EZA199 (12.7mm/.5” ASME/ANSI/AGD type) Lifting knob: No.21EZA105 (12.7mm/.5” ISO/JIS type)* No.21EZA150 (12.7mm/.5” ASME/ANSI/AGD type)* No.21EZA197 (25.4mm/1” models) No.21EZA200 (50.8mm/2” models) Lifting cable: No.540774 Lifting lever: No.137693 (for measuring range: 25.4 and 50.8mm) (supplied with 25.4mm and 50.8mm models as standard.)• Auxiliary spindle spring: No.02ACA571 (25.4mm/1” models)** No.02ACA773 (50.8mm/2” models)**• Lug-on-senter back: No.101040 (25.4mm/1” and 50.8mm/2”, ISO/JIS type) No.101306 (25.4mm/1” and 50.8mm/2”, ASME/ANSI/AGD type) * Not available for low measuring force models. **Required when orienting the indicator upside down.• SPC Cable: No.905338 (1m) No.905409 (2m)• USB Input Tool Direct (2m): 06ADV380F• Connecting Cables for U-WAVE-T (160mm): No.02AZD790F For footswitch (02AZE140F) Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Contact points for Mitutoyo’s dial indicators (Refer to pages F-46 to F-49 for details.) Interchangeable backs for 2 series (Refer to page F-50 for details.)• Measuring stands (Refer to page F-80 for details.)ABLOLUTE Digimatic Indicator ID-CXSERIES 543 — Standard Type• The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18.• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors. • Tolerance-judging measurement is available by setting upper and lower limit values. • Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery. • Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems. The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N/B, makes buttons easier to press and operations easier to perform. • Three large buttons Actual size11mmThe large LCD incorporates 11mm characters giving 1.5 times the character area of conventional products (which display 8.5mm characters) making measurement values much easier to read. • Large LCD• Calculation: f (x) = Ax Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efciency.• Function locking Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.• Power switch • Data output (when connected to an external device)• Data hold (when no external device is connected)• Parameter setting modeCount direction switching, tolerance judgment setting, resolution switching, scale factor setting, and function lock setting• inch/mm conversion (inch/mm models)Switches between the ABS (preset) and INC (zeroset) measurement modesThe display can be rotated 330°, allowing use at a position where you can easily read the measurement value.• 330º rotary display330°330°Refer to the ABS Digimatic Indicator ID-CXbrochure (E4330-543) for details.Usage exampleNote: The measuring jig is not supplied with the ID-CX.Measuring range 25.4mm543-470BMeasuring range 50.8mm543-490BStandard TypeAn inspection certicate is supplied as standard. Refer to page X for details.Low measuring force type543-394BMeasuring range 12.7mm543-390B(Refer to page X for details.)


page 346