MEASURING INSTRUMENTS CATALOG No.E2016
F-4FMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.An inspection certicate is supplied as standard. Refer to page X for details.7.61652050.154.4ø54 0-0.009ø87.321.246.5ø10.913.317ø5919.96.5ø67.443.51437.27.313.3Contact pointM2.5×0.45IP-53 modelABSOLUTE Digimatic Indicator ID-SXSERIES 543• Cost-effective oriented designID-SX indicators use a button-type battery (SR44) and come with the minimum of functionality for ease of use. There is a choice of models in the lineup allowing selection of 0.01 mm, 0.001 mm or inch-based measurement resolutions.• IP53 dust/water protection levelThe models listed below also provide IP53 dust/water protection level specications: 543-794/94B/95/95B/96/96B• ABS (absolute) sensorThese Digimatic indicators employ Mitutoyo’s proprietary ABS (absolute) sensor, which makes it possible to restore the origin point even if the power is turned off. This eliminates the need to perform origin restoration each time the power is turned on. Furthermore, this sensor ensures that overspeed errors do not occur, which improves reliability.• Long battery lifeOne button battery (SR44) provides approximately 20,000 hours of continuous use for .0005”/0.01mm resolution models.FunctionsOrigin set (zero-set) : The display can be zeroed at any chosen position.Direction switching : The measuring direction can be switched.in/mm reading (inch/mm models only) Measurement data output: These indicators have a measurement data output socket, which makes it possible to output measurement to the DP-1VR mini processor or to a PC through an input tool. Furthermore, the U-WAVE measurement data wireless communication system can be used to wirelessly input measurement data to a PC.Error warningOptional accessories• Lifting Lifting leverNo.21EZA198 (ISO/JIS/DIN Type), No.21EZA199 (ASME/ANSI/ AGD Type) Lifting knobNo.21EZA105 (ISO/JIS/DIN Type), No.21EZA150 (ASME/ANSI/ AGD Type) Lifting cable No. 540774 • SPC Cable: No.905338 (1m) No.905409 (2m)• USB Input Tool Direct (2m) : 06ADV380F• Connecting Cables for U-WAVE-T (160mm): No.02AZD790F For footswitch: 02AZE140F Refer to page F-60 for details.• Digimatic Mini-Processor DP-1VR: 264-504• Contact points for Mitutoyo’s dial indicators (Refer to pages F-51 to F-54 for details.) Interchangeable backs for 2 series (Refer to page F-55 for details.)• Measuring stands (Refer to page F-79 to F-85 for details.)Technical DataDisplay: 6-digit LCD and signScale type: ABSOLUTE electrostatic linear encoderUsable orientation: AllPower supply: SR44, part No. 938882 for initial operational checks (standard accessory)Maximum response speed: No limit (scan-type measurement is not supported)Operating temperature range: 0 to 40ºCStorage temperature range:-10 to 60ºC Unit: mmDimensionsIP53 dust/water protection levelLevel 5: Dust protectionWhile complete protection against invasion of dust is not provided, protection is adequate to prevent dust amounts that would inhibit the prescribed operations and safety of the electronic equipment.Level 3: Protection against spraying waterThe product suffers no harmful effects when subjected to water sprayed at an angle of up to 60 degrees on both sides.For details on the dust/water protection level test conditions, please refer to IEC 60529:2001 and JIS C 0920:2003.IP code is the degree of protection against solid foreign objects and water.Mitutoyo offers a lineup of coolant proof, ID-N/B indicators that have excellent resistance to oil, water and dust and so are suitable for use in environments that include splashing cutting uid.Refer to the ABS Digimatic Indicator ID-SSeries brochure (E12013) for details.(Refer to page X for details.)Inch/MetricOrder No.RangeResolutionAccuracy*1Back typeMeasuring forceBattery life*3Dust/Water protection level*4Overall*2HysteresisRepeatability543-791.5”/12.7 mm.00005”/0.001mm±.0001”/0.003mm.0001”/0.002mm.0001”/0.002mmWith lug1.5N or less18,000 hoursIP42543-791BFlat543-792With lug543-792BFlat543-793.0001”/0.001mmWith lug543-793BFlat543-795.00005”/0.001mmWith lug2.5N or lessIP53543-795BFlat543-796With lug543-796BFlat543-782.0005”/0.01mm±.0010”/0.02mm.0010”/0.02mm.0005”/0.01mmWith lug1.5N or less20,000 hoursIP42543-782BFlat543-783With lug543-783BFlat*1 These values apply at 20ºC, and do not include ±1 count allowance for quantization error. *2 Overall magnication and linearity. *3 The battery life varies, depending on the number of times the Digimatic indicators are used as well as the way it is used. The values listed above are approximations.*4 This is only valid when the data socket cover is in place. Does not apply if the cover is removed, a lifting accessory is attached, or a connecting cable is attached.SPECIFICATIONSMetricOrder No.Range ResolutionAccuracy*1Back typeMeasuring forceBattery life*3(continuous use)Dust/Water protection level*4Overall*2HysteresisRepeatability543-79012.7 mm0.001 mm0.003 mm0.002 mm0.002 mmWith lug1.5N or less18,000 hoursIP42543-790BFlat543-794With lug2.5N or lessIP53543-794BFlat543-7810.01 mm0.02 mm0.02 mm0.01 mmWith lug1.5N or less20,000 hoursIP42543-781BFlatISO/JIS/DIN TypeASME/ANSI/AGD TypeISO/JIS Type543-781ID-S1012X543-790ID-S112X543-794ID-S112PXNote 1:Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.Note 2:Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.