MEASURING INSTRUMENTS CATALOG No.E2016
300/682

E-11EMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Dedicated gauge block sets for micrometer inspection. Sets 516-106/7/8 and 516-322/3 are recommended for checking instrumental errors in micrometers due to the choice of block sizes ensuring that the instrument is checked through a full rotation of the spindle over the range 0-25 mm (or 0-1”). Sets 516-115/6/7, 516-165/6 and 516-177 contain blocks in 25 mm (or 1”) steps for aiding inspection of large micrometers in conjunction with one of the abovementioned sets. Sets 516-580/1/2, 516-390/1/2 are dedicated to the QuantuMike with its 2mm/rev spindle feed.Micrometer Inspection Gauge Block SetsSERIES 516SteelCERA516-607(The gauge blocks are optional.)Can clamp a stack of gauge blocks to be used for micrometer inspection.(516-132/3/4/5/6/7)A set consisting of a Micro Checker and gauge blocks for micrometer inspection. Gauge Block Sets for Micrometer Inspection Micro CheckerSteel 10-block setGauge BlocksLength Standards Brought to You by MitutoyoAn inspection certicate is supplied as standard. Refer to page X for details.Steel 10-block setSteel 8-block setSteel 10-block setCERA 10-block setCERA 10-block setCERA 8-block setCERA 10-block setSPECIFICATIONSMetric Micro Checker (holder only)Order No.516-607Applicable gauge block set516-106, 516-107, 516-108, 516-156, 516-157, 516-158Applicable gauge block size (mm)2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25Inch Micro Checker (holder only)Order No.516-608Applicable gauge block set516-921, 516-922, 516-923, 516-321, 516-322, 516-323Applicable gauge block size (inch).105, .210, .315, .420, .5, .605, .710, .815, .920, 1

元のページ 

page 300

※このページを正しく表示するにはFlashPlayer10.2以上が必要です