MEASURING INSTRUMENTS CATALOG No.E2016
251/682

D-32DMitutoyo operates a policy of continuous improvement that aims to provide the customer with the benet of the latest technological advances.Therefore the company reserves the right to change any or all aspects of any product specication without notice.• Specially designed for inside measurements in hard-to-reach places.• Digital models are IP67 Absolute type. No need to reset the origin after switching on. (Refer to page D-8 for a description of Absolute measurement.)• Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.ABSOLUTE Inside CaliperSERIES 573, 536 — Knife-edge/Inside Groove/Point Jaw TypeInside groove typeKnife-edge typePoint jaw type573-645573-646SPECIFICATIONSMetric Digital modelOrder No.RangeAccuracyRemarks573-64210 - 200mm±0.05mmKnife-edge type, Measurable min. hole diameter: ø10mm573-643*10 - 200mm±0.05mmKnife-edge type, Measurable min. hole diameter: ø10mm573-645**10.1 - 160mm±0.05mmInside groove type, Measurable min. hole diameter: ø10.1mm573-647*10.1 - 160mm±0.05mmInside groove type, Measurable min. hole diameter: ø10.1mm573-646**20.1 - 170mm±0.03mmPoint jaw type, Measurable min. hole diameter: ø20.1mm573-648*20.1 - 170mm±0.03mmPoint jaw type, Measurable min. hole diameter: ø20.1mm * without thumb roller** Incorporated with the offsetting function, which indicates the actual measurement value. Inch/Metric Digital modelOrder No.RangeAccuracyRemarks573-742.4 - 6"±.002"Knife-edge type, Measurable min. hole diameter: ø.4"573-745**.404 - 6"±.002"Inside groove type, Measurable min. hole diameter: ø.404"573-746**.804 - 6"±.0015"Point jaw type, Measurable min. hole diameter: ø.804"** Incorporated with the offsetting function, which indicates the actual measurement value. MetricOrder No.RangeAccuracyRemarks536-14210 - 200mm±0.12mmKnife-edge type, Measurable min. hole diameter: ø10.1mm536-14510.1 - 150mm±0.05mmInside groove type, Measurable min. hole diameter: ø10.1mm536-14620.1 - 150mm±0.05mmPoint jaw type, Measurable min. hole diameter: ø20.1mm536-14730.1 - 300mm±0.08mmPoint jaw type, Measurable min. hole diameter: ø30.1mm536-14870.1 - 450mm±0.10mmPoint jaw type, Measurable min. hole diameter: ø70.1mm536-14970.1 - 600mm±0.12mmPoint jaw type, Measurable min. hole diameter: ø70.1mm536-142573-642536-145536-146(Refer to page X for details.)Technical DataAccuracy:Refer to the list of specications. (excluding quantizing error for digital models)Resolution*:0.01mm or .00005"/0.01mmGraduation**: 0.05mmDisplay*:LCDScale type*:ABSOLUTE electromagnetic induction linear encoderMax. response speed*: UnlimitedBattery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)Battery life*:Approx. 3 years under normal useDust/Water protection level*: IP67 (IEC 60529)**** Digital models ** Analog models*** This model is not waterproof type. Therefore, rustproong shall be applied after use. Optional accessoriesFor details, refer to page D-39.Connecting cables for IT/DP/MUX05CZA624: SPC cable with data button (1m)05CZA625: SPC cable with data button (2m)USB Input Tool Direct06ADV380A: SPC cable for USB-ITN-A (2m)Connecting cables for U-WAVE-T 02AZD790A: SPC cable for U-WAVE with data button (160mm)02AZE140A: SPC cable for footswitchMore than ø20Knife-edge typeInside groove typeInside groove type(Refer to page X for details.)

元のページ 

page 251

※このページを正しく表示するにはFlashPlayer10.2以上が必要です