HOME
Site Map
Japanese
HOME
/
TechnologyTechnology
/
Accredited Laboratories
/
Miyazaki Plant
Miyazaki Plant produces gauge blocks and also provides calibration services as a global MRA accredited laboratory for end standards.
Accreditation No.
JCSS 0030
Accredited Laboratory
Name : Miyazaki Plant, Mitutoyo Corporation
Address : 10652-1, Kou, Tano-cho, Miyazaki-shi, Miyazaki-ken 889-1701 Japan
Enquiry : Quality Control Section
TEL : +81-985-86-2591
FAX : +81-985-86-0827
Scope
Type of service
Calibration scope
CMC(expanded uncertainty (
k
=2))
(
L
(mm):Nominal length)
Length
Measuring
Instrument
Gauge blocks
(Interferometry method)
From 0.1 mm up to 100 mm
0.020 μm
More than 100 mm up to 250 mm
(0.010 + 0.00010·
L
) μm
More than 250 mm up to 1000 mm
(0.020 + 0.00020·
L
) μm
Gauge blocks
(Comparison method)
From 0.1 mm up to 100 mm
0.06 μm
More than 100 mm up to 1000 mm
(0.04 + 0.00043·
L
) μm
End gauges with flat ends
(Interferometry method)
From 0.1 mm up to 2010 mm
(0.26 + 0.54·
L
/1000) μm
Personal Information Protection Policy
Notes on Use
Copyright © 2005 Mitutoyo Corporation. All rights reserved.
