Micrometer Heads | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Digital type | 164-163 | 0-50 | 0.001 | Flat (carbide tip) | Plain | |||||||||||||
350-251-30 | 0-25 | 0.001 | Flat (carbide tip) | Plain | ||||||||||||||
350-252-30 | With clamp nut | |||||||||||||||||
350-253-30 | Spherical (SR4) (carbide tip) | Plain | ||||||||||||||||
350-254-30 | With clamp nut | |||||||||||||||||
350-281-30 | Flat (carbide tip) | Plain | ||||||||||||||||
350-282-30 | With clamp nut | |||||||||||||||||
350-283-30 | Spherical (SR4) (carbide tip) | Plain | ||||||||||||||||
350-284-30 | With clamp nut | |||||||||||||||||
350-261-30 | Flat (with antirotation device) | Plain | ||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Ultra-small type | 148-201-10 | 0-6.5 | 0.001 | Flat | Plain | |||||||||||||
148-205-10 | Spherical (SR3) | |||||||||||||||||
148-209-10 *1 | Flat, Reverse reading | |||||||||||||||||
148-203-10 | Flat | With clamp nut | ||||||||||||||||
148-207-10 | Spherical (SR3) | |||||||||||||||||
148-211-10 *2 | Flat, Reverse reading | |||||||||||||||||
*1 No. 148-209-10 and No. 148-201-10 are the same CAD. | ||||||||||||||||||
*2 No. 148-211-10 and No. 148-203-10 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Ultra-small type | 148-215 | 0-5 | 0.002 | Spherical (SR1.5) | Plain | |||||||||||||
148-216 | With clamp nut | |||||||||||||||||
148-201 | 0-6.5 | 0.001 | Flat | Plain | ||||||||||||||
148-205 | Spherical (SR3) | |||||||||||||||||
148-209 *1 | Flat, Reverse reading | |||||||||||||||||
148-203 | Flat | With clamp nut | ||||||||||||||||
148-207 | Spherical (SR3) | |||||||||||||||||
148-211 *2 | Flat, Reverse reading | |||||||||||||||||
*1 No. 148-209 and No. 148-201 are the same CAD. | ||||||||||||||||||
*2 No.148-211 and No. 148-203 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | Special features | ||||||||||||
Short Body with Choice of Thimble Diameter |
148-301-10 | 0-6.5 | 0.01 | Flat | Plain | φ15 | ||||||||||||
148-303-10 | φ20 | |||||||||||||||||
148-307-10 | 0-13 | φ15 | ||||||||||||||||
148-309-10 | φ20 | |||||||||||||||||
148-311-10 | φ29 | |||||||||||||||||
148-302-10 | 0-6.5 | With clamp nut | φ15 | |||||||||||||||
148-304-10 | φ20 | |||||||||||||||||
148-308-10 | 0-13 | φ15 | ||||||||||||||||
148-310-10 | φ20 | |||||||||||||||||
148-312-10 | φ29 | |||||||||||||||||
148-313-10 | 0-6.5 | Spherical (SR4) | Plain | φ15 | ||||||||||||||
148-314-10 | With clamp nut | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | Special features | ||||||||||||
Short Body with Choice of Thimble Diameter |
148-301 | 0-6.5 | 0.01 | Flat | Plain | φ15 | ||||||||||||
148-303 | φ20 | |||||||||||||||||
148-305 | φ29 | |||||||||||||||||
148-307 | 0-13 | φ15 | ||||||||||||||||
148-309 | φ20 | |||||||||||||||||
148-311 | φ29 | |||||||||||||||||
148-302 | 0-6.5 | With clamp nut | φ15 | |||||||||||||||
148-304 | φ20 | |||||||||||||||||
148-306 | φ29 | |||||||||||||||||
148-308 | 0-13 | φ15 | ||||||||||||||||
148-310 | φ20 | |||||||||||||||||
148-312 | φ29 | |||||||||||||||||
148-313 | 0-6.5 | Spherical (SR4) | Plain | φ15 | ||||||||||||||
148-314 | With clamp nut | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Small Standard type | 148-104-10 | 0-13 | 0.01 | Flat | Plain | |||||||||||||
148-801-10 | Spherical (SR4) | |||||||||||||||||
148-821-10 *1 | Flat, Reverse reading | |||||||||||||||||
148-103-10 | Flat | With clamp nut | ||||||||||||||||
148-802-10 | Spherical (SR4) | |||||||||||||||||
148-822-10 *2 | Flat, Reverse reading | |||||||||||||||||
148-121-10 | Flat | Plain with spindle rock | ||||||||||||||||
148-803-10 | Spherical (SR4) | |||||||||||||||||
148-823-10 *3 | Flat, Reverse reading | |||||||||||||||||
148-120-10 | Flat | With clamp nut and spindle rock |
||||||||||||||||
148-804-10 | Spherical (SR4) | |||||||||||||||||
148-824-10 *4 | Flat, Reverse reading | |||||||||||||||||
*1 No. 148-821-10 and No. 148-104-10 are the same CAD. | ||||||||||||||||||
*2 No. 148-822-10 and No. 148-103-10 are the same CAD. | ||||||||||||||||||
*3 No. 148-823-10 and No. 148-121-10 are the same CAD. | ||||||||||||||||||
*4 No. 148-824-10 and No. 148-120-10 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Small Standard type | 148-104 | 0-13 | 0.01 | Flat | Plain | |||||||||||||
148-801 | Spherical (SR4) | |||||||||||||||||
148-821 *1 | Flat, Reverse reading | |||||||||||||||||
148-103 | Flat | With clamp nut | ||||||||||||||||
148-802 | Spherical (SR4) | |||||||||||||||||
148-822 *2 | Flat, Reverse reading | |||||||||||||||||
148-121 | Flat | Plain with spindle rock | ||||||||||||||||
148-803 | Spherical (SR4) | |||||||||||||||||
148-823 *3 | Flat, Reverse reading | |||||||||||||||||
148-120 | Flat | With clamp nut and spindle rock |
||||||||||||||||
148-804 | Spherical (SR4) | |||||||||||||||||
148-824 *4 | Flat, Reverse reading | |||||||||||||||||
*1 No. 148-821 and No. 148-104 are the same CAD. | ||||||||||||||||||
*2 No. 148-822 and No. 148-103 are the same CAD. | ||||||||||||||||||
*3 No. 148-823 and No. 148-121 are the same CAD. | ||||||||||||||||||
*4 No. 148-824 and No. 148-120 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Standard type in Small Size with Zero-adjustable Thimble |
148-503 | 0-13 | 0.01 | Flat | Plain | |||||||||||||
148-853 | Spherical (SR4) | |||||||||||||||||
148-863 *1 | Flat, Reverse reading | |||||||||||||||||
148-513 *2 | Flat (Stainless steel throughout) | |||||||||||||||||
148-508 | Flat | With clamp nut | ||||||||||||||||
148-858 | Spherical (SR4) | |||||||||||||||||
148-868 *3 | Flat, Reverse reading | |||||||||||||||||
148-518 *4 | Flat (Stainless steel throughout) | |||||||||||||||||
148-506 | Flat | Plain with spindle rock | ||||||||||||||||
148-856 | Spherical (SR4) | |||||||||||||||||
148-866 *5 | Flat, Reverse reading | |||||||||||||||||
148-504 | Flat | With clamp nut and spindle rock |
||||||||||||||||
148-854 | Spherical (SR4) | |||||||||||||||||
148-864 *6 | Flat, Reverse reading | |||||||||||||||||
*1 No. 148-863 and No. 148-503 are the same CAD. | ||||||||||||||||||
*2 No. 148-513 and No. 148-503 are the same CAD. | ||||||||||||||||||
*3 No. 148-868 and No. 148-508 are the same CAD. | ||||||||||||||||||
*4 No. 148-518 and No. 148-508 are the same CAD. | ||||||||||||||||||
*5 No. 148-866 and No. 148-506 are the same CAD. | ||||||||||||||||||
*6 No. 148-864 and No. 148-504 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Small Standard type with Carbide-tipped Spindle |
149-132-10 | 0-15 | 0.01 | Flat | Plain | |||||||||||||
149-801-10 | Spherical (SR4) | |||||||||||||||||
149-821-10 *1 | Flat, Reverse reading | |||||||||||||||||
149-131-10 | Flat | With clamp nut | ||||||||||||||||
149-802-10 | Spherical (SR4) | |||||||||||||||||
149-822-10 *2 | Flat, Reverse reading | |||||||||||||||||
149-183-10 | Flat | Plain with spindle rock | ||||||||||||||||
149-803-10 | Spherical (SR4) | |||||||||||||||||
149-823-10 *3 | Flat, Reverse reading | |||||||||||||||||
149-184-10 | Flat | With clamp nut and spindle rock |
||||||||||||||||
149-804-10 | Spherical (SR4) | |||||||||||||||||
149-824-10 *4 | Flat, Reverse reading | |||||||||||||||||
*1 No. 149-821-10 and No. 149-132-10 are the same CAD. | ||||||||||||||||||
*2 No. 149-822-10 and No. 149-131-10 are the same CAD. | ||||||||||||||||||
*3 No. 149-823-10 and No. 149-183-10 are the same CAD. | ||||||||||||||||||
*4 No. 149-824-10 and No. 149-824-10 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Small Standard type with Carbide-tipped Spindle |
149-132 | 0-15 | 0.01 | Flat | Plain | |||||||||||||
149-801 | Spherical (SR4) | |||||||||||||||||
149-821 *1 | Flat, Reverse reading | |||||||||||||||||
149-131 | Flat | With clamp nut | ||||||||||||||||
149-802 | Spherical (SR4) | |||||||||||||||||
149-822 *2 | Flat, Reverse reading | |||||||||||||||||
149-183 | Flat | Plain with spindle rock | ||||||||||||||||
149-803 | Spherical (SR4) | |||||||||||||||||
149-823 *3 | Flat, Reverse reading | |||||||||||||||||
149-184 | Flat | With clamp nut and spindle rock |
||||||||||||||||
149-804 | Spherical (SR4) | |||||||||||||||||
149-824 *4 | Flat, Reverse reading | |||||||||||||||||
*1 No. 149-821 and No. 149-132 are the same CAD. | ||||||||||||||||||
*2 No. 149-822 and No. 149-131 are the same CAD. | ||||||||||||||||||
*3 No. 149-823 and No. 149-183 are the same CAD. | ||||||||||||||||||
*4 No. 149-824 and No. 149-184 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Type | Stem | ||||||||||||
Medium-sized Standard Type | 150-196-10 | 0-25 | 0.01 | Flat | Without ratchet | Plain | ||||||||||||
150-195-10 | Without ratchet | With clamp nut | ||||||||||||||||
150-211-10 | Without ratchet | Plain with spindle rock | ||||||||||||||||
150-212-10 | Without ratchet | With clamp nut and spindle rock |
||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Type | Stem | ||||||||||||
Medium-sized Standard Type | 150-196 | 0-25 | 0.01 | Flat | Without ratchet | Plain | ||||||||||||
150-192 | With ratchet | |||||||||||||||||
150-801 | Spherical | With ratchet | ||||||||||||||||
150-821 *1 | Flat | With ratchet, Reverse reading | ||||||||||||||||
150-190 *2 | With ratchet and vernier | |||||||||||||||||
150-219 | Without ratchet, long spindle | |||||||||||||||||
150-195 | Without ratchet | With clamp nut | ||||||||||||||||
150-191 | With ratchet | |||||||||||||||||
150-802 | Spherical | With ratchet | ||||||||||||||||
150-822 *3 | Flat | With ratchet, Reverse reading | ||||||||||||||||
150-189 *4 | With ratchet and vernier | |||||||||||||||||
150-220 | Without ratchet, long spindle | |||||||||||||||||
150-211 | Without ratchet | Plain with spindle rock | ||||||||||||||||
150-209 | With ratchet | |||||||||||||||||
150-803 | Spherical | With ratchet | ||||||||||||||||
150-823 *5 | Flat | With ratchet, Reverse reading | ||||||||||||||||
150-183 *6 | With ratchet and vernier | |||||||||||||||||
150-223 | Without ratchet, long spindle | |||||||||||||||||
150-212 | Without ratchet | With clamp nut and spindle rock |
||||||||||||||||
150-210 | With ratchet | |||||||||||||||||
150-804 | Spherical | With ratchet | ||||||||||||||||
150-824 *7 | Flat | With ratchet, Reverse reading | ||||||||||||||||
150-184 *8 | With ratchet and vernier | |||||||||||||||||
150-224 | Without ratchet, long spindle | |||||||||||||||||
*1 No. 150-821 and No. 150-192 are the same CAD. | *5 No. 150-823 and No. 150-209 are the same CAD. | |||||||||||||||||
*2 No. 150-190 and No. 150-192 are the same CAD. | *6 No. 150-183 and No. 150-209 are the same CAD. | |||||||||||||||||
*3 No. 150-822 and No. 150-191 are the same CAD. | *7 No. 150-824 and No. 150-210 are the same CAD. | |||||||||||||||||
*4 No. 150-189 and No. 150-191 are the same CAD. | *8 No. 150-184 and No. 150-210 are the same CAD. | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Type | Stem | ||||||||||||
Medium-sized Standard Type with 8mm diameter spindle |
151-227-10 | 0-25 | 0.01 | Flat | Without ratchet | Plain | ||||||||||||
151-260-10 | 0-50 | Without ratchet | ||||||||||||||||
151-228-10 | 0-25 | Without ratchet | With clamp nut | |||||||||||||||
151-259-10 | 0-50 | Without ratchet | ||||||||||||||||
151-225-10 | 0-25 | Without ratchet | Plain with spindle rock | |||||||||||||||
151-226-10 | 0-50 | Without ratchet | With clamp nut and spindle rock |
|||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Type | Stem | ||||||||||||
Medium-sized Standard Type with 8mm diameter spindle |
151-227 | 0-25 | 0.01 | Flat | Without ratchet | Plain | ||||||||||||
151-224 | With ratchet | |||||||||||||||||
151-222 *1 | 0.001 | With ratchet and vernier | ||||||||||||||||
151-260 | 0-50 | 0.01 | Without ratchet | |||||||||||||||
151-256 | With ratchet | |||||||||||||||||
151-228 | 0-25 | Without ratchet | With clamp nut | |||||||||||||||
151-223 | With ratchet | |||||||||||||||||
151-221 *2 | 0.001 | With ratchet and vernier | ||||||||||||||||
151-259 | 0-50 | 0.01 | Without ratchet | |||||||||||||||
151-255 | With ratchet | |||||||||||||||||
151-225 | 0-25 | Without ratchet | Plain with spindle rock | |||||||||||||||
151-214 | With ratchet | |||||||||||||||||
151-212 *3 | 0.001 | With ratchet and vernier | ||||||||||||||||
151-226 | 0-50 | 0.01 | Without ratchet | With clamp nut and spindle rock |
||||||||||||||
151-213 | With ratchet | |||||||||||||||||
151-211 *4 | 0.001 | With ratchet and vernier | ||||||||||||||||
*1 No. 151-222 and No. 151-224 are the same CAD. | ||||||||||||||||||
*2 No. 151-221 and No. 151-223 are the same CAD. | ||||||||||||||||||
*3 No. 151-212 and No. 151-214 are the same CAD. | ||||||||||||||||||
*4 No. 151-211 and No. 151-213 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Locking-screw type | 148-220-10 | 0-6.5 | 0.01 | Flat | Plain | |||||||||||||
148-221-10 | With clamp nut | |||||||||||||||||
148-222-10 | Spherical (SR3) | Plain | ||||||||||||||||
148-223-10 | With clamp nut | |||||||||||||||||
148-150-10 | 0-13 | Flat | Plain | |||||||||||||||
148-151-10 | With clamp nut | |||||||||||||||||
148-152-10 | Spherical (SR4) | Plain | ||||||||||||||||
148-153-10 | With clamp nut | |||||||||||||||||
148-316-10 | 0-6.5 | Flat | Plain | |||||||||||||||
148-317-10 | With clamp nut | |||||||||||||||||
148-318-10 | Spherical (SR4) | Plain | ||||||||||||||||
148-319-10 | With clamp nut | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Locking-screw type | 148-220 | 0-6.5 | 0.01 | Flat | Plain | |||||||||||||
148-221 | With clamp nut | |||||||||||||||||
148-222 | Spherical (SR3) | Plain | ||||||||||||||||
148-223 | With clamp nut | |||||||||||||||||
148-150 | 0-13 | Flat | Plain | |||||||||||||||
148-151 | With clamp nut | |||||||||||||||||
148-152 | Spherical (SR4) | Plain | ||||||||||||||||
148-153 | With clamp nut | |||||||||||||||||
148-316 | 0-6.5 | Flat | Plain | |||||||||||||||
148-317 | With clamp nut | |||||||||||||||||
148-318 | Spherical (SR4) | Plain | ||||||||||||||||
148-319 | With clamp nut | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Type | Stem | ||||||||||||
Non-rotating Spindle type | 153-101 | 0-15 | 0.01 | Flat (carbide tip) | Without ratchet | Plain | ||||||||||||
153-201 | 0-25 | With ratchet | ||||||||||||||||
153-202 *1 | 0.001 | With ratchet and vernier | ||||||||||||||||
153-203 | 0.01 | Without ratchet | ||||||||||||||||
153-204 *2 | 0.001 | Without ratchet, with vernier | ||||||||||||||||
*1 No. 153-202 and No. 153-201 are the same CAD. | ||||||||||||||||||
*2 No. 153-204 and No. 153-203 are the same CAD. | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Quick Spindle Feed of 1mm/rev | 152-101 | 0-15 | 0.01 | Flat (carbide tip) | Plain | |||||||||||||
152-102 | 0-25 | |||||||||||||||||
152-103 | 0-50 | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Fine Spindle Feed of 0.1mm/rev | 148-142-10 | 0-6.5 | 0.002 | Spherical (SR4) | Plain | |||||||||||||
148-143-10 | With clamp nut | |||||||||||||||||
148-342-10 | Plain | |||||||||||||||||
148-343-10 | With clamp nut | |||||||||||||||||
148-242-10 | Spherical (SR3) | Plain | ||||||||||||||||
148-243-10 | With clamp nut | |||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Fine Spindle Feed of 0.1mm/rev | 148-142 | 0-6.5 | 0.002 | Spherical (SR4) | Plain | |||||||||||||
148-143 | With clamp nut | |||||||||||||||||
148-342 | Plain | |||||||||||||||||
148-343 | With clamp nut | |||||||||||||||||
148-242 | Spherical (SR3) | Plain | ||||||||||||||||
148-243 | With clamp nut | |||||||||||||||||
148-244 | 0-5 | 0.004 | Spherical (SR1.5) | Plain | ||||||||||||||
148-245 | With clamp nut | |||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Fine Spindle Feed of 0.25mm/rev | 148-132-10 *1 | 0-13 | 0.01 | Spherical (SR4) | Plain | |||||||||||||
148-133-10 *2 | With clamp nut | |||||||||||||||||
148-322-10 *3 | 0-6.5 | 0.01 | Plain | |||||||||||||||
148-323-10 *4 | With clamp nut | |||||||||||||||||
*1 No. 148-132-10 and No. 148-801-10 are the same CAD. | ||||||||||||||||||
*2 No. 148-133-10 and No. 148-802-10 are the same CAD. | ||||||||||||||||||
*3 No. 148-322-10 and No. 148-313-10 are the same CAD. | ||||||||||||||||||
*4 No. 148-323-10 and No. 148-314-10 are the same CAD. | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Fine Spindle Feed of 0.25mm/rev | 148-132 *1 | 0-13 | 0.01 | Spherical (SR4) | Plain | |||||||||||||
148-133 *2 | With clamp nut | |||||||||||||||||
148-322 *3 | 0-6.5 | 0.01 | Plain | |||||||||||||||
148-323 *4 | With clamp nut | |||||||||||||||||
*1 No. 148-132 and No. 148-801 are the same CAD. | ||||||||||||||||||
*2 No. 148-133 and No. 148-802 are the same CAD. | ||||||||||||||||||
*3 No. 148-322 and No. 148-313 are the same CAD. | ||||||||||||||||||
*4 No. 148-323 and No. 148-314 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Differential Screw Translator (Extra-Fine Feed) type |
110-105-10 | 0-1 | 0.001 | Flat (carbide tip) | With clamp nut | |||||||||||||
110-106-10 *1 | 0.0001 | |||||||||||||||||
110-107-10 | 0.001 | Spherical (SR10) (carbide tip) |
||||||||||||||||
110-108-10 *2 | 0.0001 | |||||||||||||||||
110-502-10 | Thimble(coarse) Thimble(fine) | Thimble(coarse) Thimble(fine) | Flat | With clamp nut | ||||||||||||||
0-13 0-0.2 | 0.01 0.0005 | |||||||||||||||||
*1 No. 110-106-10 and No. 110-105-10 are the same CAD. | ||||||||||||||||||
*2 No. 110-108-10 and No. 110-107-10 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Differential Screw Translator (Extra-Fine Feed) type |
110-101 | 0-2.5 | 0.001 | Flat (carbide tip) | With clamp nut | |||||||||||||
110-102 *1 | 0.0001 | |||||||||||||||||
110-105 | 0-1 | 0.001 | Flat (carbide tip) | |||||||||||||||
110-106 *2 | 0.0001 | |||||||||||||||||
110-107 | 0.001 | Spherical (SR10) (carbide tip) |
||||||||||||||||
110-108 *3 | 0.0001 | |||||||||||||||||
110-502 | Thimble(coarse) Thimble(fine) | Thimble(coarse) Thimble(fine) | Flat | With clamp nut | ||||||||||||||
0-13 0-0.2 | 0.01 0.0005 | |||||||||||||||||
*1 No. 110-102 and No. 110-101 are the same CAD. | ||||||||||||||||||
*2 No. 110-106 and No. 110-105 are the same CAD. | ||||||||||||||||||
*3 No. 110-108 and No. 110-107 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Large Thimble type for Fine Feed | 152-283 | 0-10 | 0.002 | Flat (carbide tip) | With clamp nut | |||||||||||||
152-332 | 0-25 | Plain | ||||||||||||||||
152-348 *1 | ||||||||||||||||||
152-380 | 0-50 | |||||||||||||||||
*1 No. 152-348 and No. 152-332 are the same CAD. | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
XY-Stage type | 152-390 | 0-25 | 0.005 | Flat (with antirotation device) | Plain | |||||||||||||
152-389 *1 | ||||||||||||||||||
152-402 *2 | 0.001 | Spherical (SR10) (carbide tip) |
||||||||||||||||
152-401 | (vernier) | |||||||||||||||||
*1 No. 152-389 and No. 152-390 are the same CAD. | ||||||||||||||||||
*2 No. 152-402 and No. 152-401 are the same CAD. | ||||||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Non-rotating Spindle and Large Thimble |
197-101 | 0-50 | 0.005 | Flat (carbide tip) | Plain | |||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Fine Graduation and High Accuracy |
153-301 | 0-25 | 0.0005 | Flat (carbide tip) | Plain | |||||||||||||
(vernier) | ||||||||||||||||||
Name | Order No. | Measuring range (mm) | Graduation (mm) | Spindle end | Stem | |||||||||||||
Digit Counter type | 250-301 | 0-25 | 0.01 | Flat | Plain | |||||||||||||
Name | Order No. | Range (mm) | Graduation (mm) | Max. loading (kg) | Handle power at the max. loading (N) |
|||||||||||||
Micro Jack | 7850 | 60-75 | 0.01 | 400 | 90 | |||||||||||||
*Only 2D-CAD is provided. | ||||||||||||||||||
Name | Order No. | Order No. | Order No. | Order No. | Mounting hole size | |||||||||||||
Mounting Fixtures for stem locknut type |
303559 | 303563 | 303561 | 303565 | φ9.5×9.5 for stem locknut type | |||||||||||||
303568 | 303572 | 303570 | 303574 | φ9.5×15 for stem locknut type | ||||||||||||||
303578 | 303582 | 303580 | 303584 | φ10×15 for stem locknut type | ||||||||||||||
*Only 2D-CAD is provided. | ||||||||||||||||||
Name | Order No. | Order No. | Order No. | Order No. | Mounting hole size | |||||||||||||
Mounting Fixtures for plain stem type |
303560 | 303564 | 30356 | 303566 | φ9.5×9.5 for plain stem type | |||||||||||||
303569 | 303573 | 303571 | 303575 | φ9.5×15 for plain stem type | ||||||||||||||
303579 | 303583 | 303581 | 303585 | φ10×15 for plain stem type | ||||||||||||||
3D-CAD | ||||||||||||||||||
Name | Order No. | Stroke (mm) |
Feed pitch (mm) |
Feed accuracy (㎛) |
Stem diameter (mm) |
Screw nominal diameter |
Sleeve diameter (mm) |
Mass (g) | Others | |||||||||
Precision Leadscrew | 04AZA160 | 6.5 | 0.5 | ±5 | 0 φ6-0.008 |
M4.5×0.5 | φ7 | 10 |
·AS type: Flat spindle tip without nut ·BS type: Spherical spindle tip with nut |
|||||||||
04AZA161 | 11 | |||||||||||||||||
04AZA162 | 13 | ±2 | 0 φ9.5-0.009 |
M7.35×0.5 | φ10.5 | 27 | ||||||||||||
04AZA163 | 30 | |||||||||||||||||
04AZA164 | 25 | 0 φ10-0.009 |
φ12 | 61 | ||||||||||||||
04AZA165 | 64 |