Read First
Gauge Blocks/Calibration Equipments
Product Overview

Gauge Block Auto-interferomometer
GBI

���i�ڍ�
  • Interferometric measurement of gauge blocks
  • Both steel and ceramic gauge blocks are available
  • For detailed information‚ leaflet is available on request.
  • For detailed information‚ refer to the leaflet No. E4163

Calculation Type Gauge Block Automatic Check Equipment
GBCD-100A

���i�ڍ�
  • Evaluates a gauge block with comparison measurement.
  • Auto-measurement is made.
  • For detailed information‚ leaflet is available on request.
  • For detailed information‚ refer to the leaflet No. E4163

Manual Calculation Type Gauge Block Comparator
GBCD-250

���i�ڍ�
  • Evaluates a gauge block with comparison measurement.
  • A single (upper) detector is equipped.
  • For detailed information‚ leaflet is available on request.
  • For detailed information‚ refer to the leaflet No. E4163

Gauge Block for Micrometer Inspection

���i�ڍ�
  • Used to inspect the Micrometer
  • Provided with Steel and Ceramic

Optical Parallel
OP

���i�ڍ�
  • Accessory for measuring the flatness and parallelism of micrometer measuring faces

Optical Flat
OF

���i�ڍ�
  • Accessory for measuring the flatness of micrometer measuring faces
  • Used to measure the flatness of precision parts.

Micrometer Standard
MB

���i�ڍ�
  • Used to adjust the zero point of micrometers.

Micrometer Standard (for screw micrometer)
MB

���i�ڍ�
  • Used to adjust the zero point of screw micrometers.

Micrometer Standard (V-groove micrometer)
MB

���i�ڍ�
  • Used to adjust the zero point of V-groove micrometers.

Micrometer stand

���i�ڍ�
  • Dedicated stand for stable measurement
  • Four types are available according to the size.

Color Ratchet Stop

���i�ڍ�
  • For controlling micrometer measurements.

Micrometer Lubricant

���i�ڍ�
  • Micrometer lubrication oil

Depth Micro Checker
CD

���i�ڍ�
  • Zero-point adjusting master dedicated to depth micrometers
  • Two models of 150mm and 300mm are available.

CERA Inside Micrometer Checker
CI

���i�ڍ�
  • Used to properly and easily adjust the zero point of inside micrometers.
  • Two models of 300mm and 600mm are available.
  • The measuring faces are ceramic-tipped.

Ring Gage

���i�ڍ�
  • Ring for setting the zero point
  • A ceramic ring is also available.

Bore Gage Zero Checker
CCG

���i�ڍ�
  • Supports a wide measuring range for setting the zero point

CERA Caliper Checker
CC

���i�ڍ�
  • Checker for accuracy inspection of calipers and height gages
  • Two models of 300mm and 600mm are available.
  • The measuring faces are ceramic-tipped.

i-Checker‚ Indicator Inspection Machine
IC1000

���i�ڍ�
  • Checker for accuracy inspection of indicators
  • Semi-auto measurement and auto measurement
  • For detailed information‚ leaflet is available on request.

Calibration Tester
UDT

���i�ڍ�
  • Tester for accuracy inspection of dial indicators
  • UDT-2 is used for indicators with a graduation of 0.01mm
  • UDT-103/105 is used for indicators with a graduation of 0.001mm

Color Cap

���i�ڍ�
  • Used for measurement control of micrometers

Ring Master Inside Diameter Measurement Instrument
RM-120

���i�ڍ�
  • High-accuracy measuring instrument of ring gauges
  • Enables absolute measurement‚ not comparison measurement.
  • Reduces operation man hours associated with measurement.